Mazuma WATER PURIFIER
|
5 Stage Reverse Osmosis Water Filter System with Alkaline Cartidge Reverse Osmosis is the best and most reliable form of water filtration for drinking water. It can successfully remove almost all the contamination found in our water supplies nowadays including chlorine, sodium, potassium, calcium, fluoride, heavy metals, hardness, salts, and other inorganic substances.
This 5 Stage Reverse Osmosis Unit is designed to remove all contamination and provide you with clean, great-tasting water and give a high alkaline pH reading between 8 ? 9.5. The system achieves this by using carefully selected media, including high-grade magnesium which feeds back trace elements into the water to buffer and raise the pH of the water to high alkaline levels.
The water then passes through the 100% coconut carbon post filter to polish the final product water. This system is an affordable option if you are looking for reverse osmosis filtration with the added benefits or remineralising for pH correction. BENEFITS
Heavy Duty O-Ring Housings Unique Chloramine Removal Capability High pH Alkaline Post Filter
8 L Water Storage Tank & Universal Drain Clamp Fitting Kit including ? Everything Required for Installation Stylish Certified Faucet Tap ? Modern Design Swan Neck ABOUT THIS RO SYSTEM
This 5 stage reverse osmosis water filter system consists of a sediment cartridge to remove any dirt, rust, lumps & bumps or any sediments from the water.
Water then flows through a carbon cartridge to remove chlorine, its compounds, and other chemicals from the water before the water flows through the RO membrane.
It is the RO membrane that is the heart & soul of any RO system. The RO membrane splits the water into clean water and wastewater, sending the contaminants to waste.
The RO membrane is an excellent way to remove fluorine, its compounds and salts of heavy metals from water, including lead compounds.
Water supplied to most homes in cities & towns across USA will have a pH level around the 7 to 7.5pH level, which is alkaline.
Once the water flows through the membrane, all the minerals are stripped out of the water, and the pH level will drop to around the 6pH mark, which is acidic.
We do not recommend anyone drinks water with a pH level under 7 for an extended period unless under the direction of a doctor or suitable professional.
Once the pure water flows out of the membrane, it is stored in a 8 litre storage tank. The tank stores the water until the faucet is turned on and this pushes the water out through the alkaliser cartridge to buffer the water's pH to around the 8 to 9.5 pH mark.
Finally, it passes through the last carbon cartridge to polish the taste of the water ready for you to drink.
Filtration Stages Stage 1: Polypropylene Sediment Filter 5 Micron Replace this cartridge every 6 - 12 months for town/city treated water or every 6 months for bore water.
The purpose of stage 1 is to remove all the suspended matter such as silt, rust sand, algae, sediment, scale particles, dirt and cloudiness from the water.
Stage 2: 100% Carbon Block Filter 5 Micron Replace this cartridge every 6 - 12 months for town/city treated water or every 6 months for bore water
The goal of Step 2 is to remove herbicides, pesticides, chlorine, chlorine by-products, and organic chemicals to protect your body and extend the life of the membrane.
Stage 3: 50GPD Reverse Osmosis Membrane 0.0001 Micron Replace Every 1-4 Years (Depending On Water Quality)
This is the heart and soul of this reverse osmosis system. It removes over 98% of impurities including Organic & Inorganic Minerals, Heavy Metals & Fluoride
Performance Data
Aluminium 98% Chlorine Over 98% Arsenic 98% Herbicides Over 98% Barium 95% Pesticides Over 98% Cadmium 95% DDT Over 98% Calcium 98% Endrin Over 98% Chloride 95% Lindane Over 98% Chromium III 98% Aldrin Over 98% Copper 98% Benzene Over 98% Fluoride 95% VOCs Over 98% Iron 98% Atrazine Over 98% Lead 98% Fluoranthene Over 98% Magnesium 98% Phenol Over 98% Manganese 98% Trihalomethanes Over 98% Mercury II 85% Toxaphene Over 98% Nitrate 90% Dichloromethane Over 98% Potassium 95% Chloroform Over 98% Selenium IV 95% Trichloroethylene Over 98% Silver 98% Perchloroethylene Over 98% Sodium 95% Tannic Acids Over 98% Strontium 98% Methoxychlor Over 98% Sulphate 98% PCB Over 98% Zinc 98% Total Dissolved Solids 95% Asbestos 99%
After the water passes through the membrane, it travels to the 8 litre storage tank.
This is where the pure water is stored until you draw water from your filtration faucet on your kitchen sink.
When you turn on your faucet, the water will move out of the holding tank and towards the final 4 & 5 stages of filtration. The Membrane can be replaced every 2 to 4 years.
Stage 4: Integrated Alkaline Cartridge This cartridge is a Pure Life RO filter. The alkalizing filter can increase and maintain a constant pH level from 8.5 to 9.5 for 6-12 months or when processing up to 3000 liters of water.
It is made up of Pure USA Magnesium Oxide which provides the highest absorption of mineral content into the water over a 6-12 month period.
When new, the pH ranges from 9.5, and it decreases to around 8pH at the end of the filters life, depending on water quality. Must be replaced after handling 3000 liters of water.
Stage 5: Inline Carbon Cartridge Extremely high-grade Coconut Carbon cartridge for maximum extraction of taste or odour issues. We built this filter specifically for use after the Alkaline Cartridge. However, its uses are endless, particularly where taste and odour are a problem in drinking water. It provides clean, crisp tasting water. Can be replaced every 12 months.
System Dimensions
Height: 17" (43cm) Width: 15" (37cm) Depth: 9" (21cm)
Storage Tank Dimensions Height (With Stand): 17" (42cm) Height (No Stand): 16" (38.5cm) Width: 11" (27cm)
Package size:
Height (With Stand): 21" (54 cm) Height (No Stand): 16" (38.5cm) Width: 11" (27cm) Weight: 17.5 pounds (7.938 kg) SYSTEM INCLUDES 5 Stage Watermark Certified RO System Filters Included 8 Litre White Plastic tank 5 m White Tubing Dual Opening Spanner Inlet Water Valve Pressure Limiting Valve
System Requirements Pressure: 50-70 psi TDS: <1800 mg/L Total Hardness: <500 mg/L Temperature: <45°C
NOTE: Water that falls outside these parameters may cause the system to produce higher ratios of drain water and may lower the 50GPD rating. Water Quality in different areas can greatly impact the life of a Reverse Osmosis Membrane.
|
